Driving tools are tools used for pushing nails, and screws into position. Driving tools include various steel tools used to install, repair, and maintain a variety of constructions. Driving tools are typically available as both manual and power tools. For example, an electric drill and a hand drill are both considered driving tools.
Drills and driving tools work to bore holes with screws into wood, drywall, and plaster. Driving tools are used to hang fixtures, secure structures, and improve the sturdiness of a wall, a piece of furniture, or a spanner.
Table of Contents
- Is a socket wrench a driving tool?
- Is the hammer a driving tool?
- Is the mallet a driving tool?
- Is the punches a driving tool?
- Is a screwdriver a driving tool?
- Is the wrench/spanner a driving tool?
Is a socket wrench a driving tool?
A driving socket is a driving tool. Driving socket wrenches include pneumatic impact wrenches, hydraulic torque wrenches, torque multipliers, and breaker bars.
What is a wrench tool?
A wrench can be used to drive screws, nuts, and bolts into surfaces with mechanical and manual force. Tools defined as drivers include hammers, screwdrivers, mauls, and so on.
A wrench also called a spanner, tool, usually operated by hand, for tightening bolts and nuts. Basically, a wrench consists of a stout lever with a notch at one or both ends for gripping the bolt or nut in such a way that it can be twisted by a pull on the wrench at right angles to the axes of the lever and the bolt or nut. Some wrenches have ended with straight-sided slots that fit over the part being tightened; these tools are known as open-end wrenches and are made in various sizes to fit specific bolt and nut sizes.
Socket wrenches make it easier to remove and install fasteners. Socket wrench sets are available in three (3) main Drive sizes:
- 1/4″ Drive
- 3/8″ Drive
- 1/2″ Drive
There are three main parts to using any socket wrench.
- The Socket
- The Handle
- An Extension or Adapter
Sockets are categorized in the following way:
- Size – fastener head size to which the wrench fits (inches or mm)
- Drive – the size of the socket wrench set it will fit (1/4”, 3/8”, 1/2”)
- Depth – the socket height or reach (shallow or deep)
- Type – for the hand tool or air tool use (chrome or impact)
- 6 or 12 point – single or double hexagon
Is the hammer a driving tool?
A hammer is a driving tool. In metalwork, hammers are used for bending, riveting, and shaping. Hammers have two distinct parts, the handle, and the head. While the handle can be made of wood or metallic material, the head is always made of high carbon steel. The hammer is classified according to the type of head, hence we have:
Types of Hammers: Ball peen, straight peen, cross peen, and planishing hammer.
a. Ball-pein hammer: This is a general-purpose hammer used for riveting i.e, forming a cup-like shape from a metal sheet.
b. Cross-pein hammer: This hammer is used for striking at the horizontal corners of metals. For example, it is used during panel beating operations.
c. Straight-pein hammer: This hammer is used for vertical corners,i.e, for riveting metal sheets at awkward positions.
Is the mallet a driving tool?
Mallets are a driving tool. This is a soft hammer whose head is made of soft material like synthetic rubber to prevent the head from damaging the surface of the workpiece.
Is the punches a driving tool?
The punches are a driving tool. These are used for producing holes on thin sheets of metal, marking holes for drilling, and removing rivets. Examples are center or dot punch, and pin punch for marking drill points.
a. Centre or Dot punch: This punch is used to mark dots to aid drilling or cutting. When drilling holes, it is typically used to mark the center of the hole.
b. Drift or Pin punch: These are punches used for driving out rivets, tapered pins, and dowels from holes.
Is a screwdriver a driving tool?
The screwdrivers are driving tools. These are used for driving screws into or out of structural members. Examples are flat screwdrivers, star screwdrivers, Allen keys, and off-set screwdrivers.
a. Flat Screwdriver: It is a screwdriver used to drive in and out screws with slotted heads.
b. Star Screwdriver: Used for screws with star heads.
c. Offset screwdriver: This is the screwdriver used on screws in awkward positions, where a straight screwdriver cannot be applied.
d. Allen screwdriver: This screwdriver is used for turning screws with recessed hexagonal or square-slotted holes.
Is the wrench/spanner a driving tool?
The wrench/spanners are driving tools. Spanners or wrenches are used for driving in or driving out nuts and bolts in mechanical assembly parts.
Types of wrenches:
They may include the open-ended wrench, ring wrench, socket wrench, combination wrench, box wrench, and an adjustable wrench.